LWM-20, LWM-50
Laser wire marking machines
The LWM-20(50) are computer controlled, high speed wire and cable marking systems using UV radiation of Nd:YAG third harmonic (355nm). Contrary to traditional marking by hot stamp, IR and visible lasers - UV laser marking based on photochemical induced color changes in thin surface layer (10-20 µm) provides hight contrast mark without any damage of wire coating.
Features
-High contrast marking that will not rub off
-Totally microprocessor control
-Surface print, no insulating damage
-Compact ergonomic structure
-Unalterable contrast marking
-High speed up to 30 m per minute
-Low maintenance requirements
-Resize cable cutting and stripping
-Meets MIL-W-5088L, MIL-M-81531
-Precision mask character system, 1 shot per character
-Class 1 laser product for use on open shop floo
|
SPECIFICATIONS |
|
|
|
Parameters |
LWM-20 |
LWM-50 |
|
Wavelength, nm |
355 |
|
Pulse repetition rate, Hz |
20 |
50 (75*) |
|
Marking speed, m/min |
1.2–12 |
3–30 |
|
Machine speed of wire output, m/s |
Up to 2 |
|
Characters size, mm |
1,2х0,8–2,1х1,4 |
|
Inter characters spacing, mm |
More than 1 |
|
Type of symbols |
Full graphics capability including upper and lower cases of alpha-numeric caracters |
|
Character orientation |
Vertical, horizontal |
|
Wire diameter, mm |
?5,5 |
|
Type of wire coating |
PEF, PTFE, FEP, ETFE, XL-ETEF, etc. |
|
Computer requirements |
Microsoft® Windows® |
|
Power requirements |
220±20 V, 50/60 Hz, 10 А
|
|
Compressed air, bar |
4 |
|
Dimensions, LхWхH mm |
2300х850х1400 |
|
* On customer requirements. |
|
Operation conditions: Ambient temperature, 15-30 oC, Relative humidity from 20% to 80% (non condensing) | |
Laser Systems
